Precautions for the use of pneumatic components
Release Time：
2023-05-16 15:15
Pneumatic components are used in places such as rolling mills and textile assembly lines. Pneumatic components are used in two main areas: maintenance and supporting. Be careful when working on the use of pneumatic components, otherwise it will cause significant losses, the following is a note of caution when using pneumatic components.
First, when operating pneumatic components, do not touch the switch to avoid electric shock caused by a short circuit or wiring errors, and do not place items on it to avoid things falling off causing damage to the human body and machines and devices, but also may cause damage to the product to cause the risk of poor operation out of control.
Second, to understand whether the lubricant contained in the exhaust is moderate, you can put a clean white paper near the exhaust port of the reversing valve, after the reversing valve work three to four cycles, if the white paper is only very light spots, indicating that the lubrication effect is good, and also to understand whether there is condensation in the exhaust.
Third, to understand whether the exhaust port of the pneumatic components should not exhaust air leakage. If there is a small amount of air leakage it means that there is early damage to the pneumatic components. If there is no lubrication, you should check whether the installation position of oil misters is suitable, whether the selected specifications are appropriate, whether the adjustment of oil drip volume is reasonable, and whether the management method meets the requirements. If condensate is discharged, you should check whether the location of the filter is appropriate and whether the selection of the water removal element is reasonable. Leakage is caused by the poor sealing condition in the valve or cylinder and insufficient air pressure.
Fourth, all products of pneumatic components should be kept within the specified working pressure will voltage range when in use. In the environment of excessive moisture or oil drops and dust, must cover the protective cover to avoid damage to the product. Do not use fluids or air containing corrosive substances to avoid damage to pneumatic components.
The above is the use of pneumatic components precautions, pay attention to do not touch the switch, keep the working pressure will be within the voltage range, more check whether the exhaust port leakage, understand the exhaust contained in the lubricant is moderate, pay attention to the usual maintenance, in order to use, to avoid causing significant losses, there is a need for pneumatic components can consult us.
Other developments
The advantages of pneumatic components, application scope and maintenance methods are introduced
Although people who are not familiar with pneumatic components are not familiar with this, and they do not know what it is used for when they see it, but it is actually very widely used in life, today the new benefit pneumatic movement will briefly introduce some knowledge about the components for your familiarity.
The current technological development of pneumatic components
As the process of industrial automation continues to accelerate, technologies such as artificial intelligence are beginning to be applied to all aspects of industrial production, and pneumatics has become an important force in this change
The future outlook of the pneumatic components industry
Pneumatic components product range is wide and scattered, the difference between the cost of research and development and the cost of production equipment is quite large, so there are many manufacturers in the industry, but with a well-known brand supplier is quite limited, with brand awareness of the supplier market share is quite large.
Precautions for the use of pneumatic components
Pneumatic components are used in places such as rolling mills and textile assembly lines. Pneumatic components are used in two main areas: maintenance and supporting. Be careful when working on the use of pneumatic components, otherwise it will cause significant losses, the following is a note of caution when using pneumatic components.
What are the pneumatic components and how are they classified?
Industrial pneumatic components may sound complex and difficult to understand. However, once you break down each equipment type, their functions and components are easy to grasp, and many industries gravitate toward pneumatics and integrating them into their machines because it's an easy way to keep maintenance costs low and keep machines running longer.
Application of pneumatic components
The expansion of the application of pneumatic technology is a sign of the development of the pneumatic industry. The application of pneumatic components for two main aspects: maintenance and supporting.
Specialized in pneumatic components, such as pneumatic valves, F.R.L., cylinders and other accessories.
Address: 5# Shunhai Road, Yangting,Weihai,Shandong, China