How to maintain and care for pneumatic components equipment
Release Time：
2023-05-16 14:59
A set of pneumatic components equipment if not properly maintained, then it will reduce the life of the equipment, serious cases of failure brought about by the safety risks are not to be underestimated, then how to maintain a good set of pneumatic components equipment?
1, to ensure the correct generation of air supply system: the inlet pressure at the entrance of the tool (not the air pressure of the air compressor) is generally 90PSIG (6.2Kg/cm^2), too high, too low are detrimental to the performance and life of the tool. The inlet air must contain sufficient lubricating oil so that the air motor in the tool can be fully lubricated (a white paper can be placed in the exhaust of the tool to check whether there are oil stains, normal for the phenomenon of oil stains). The inlet air must be free of water, if the compressed air without air dryer is not appropriate.
2、Do not arbitrarily remove the parts of the tool after the operation, in addition to affecting the safety of the operator off will cause damage to the tool.
3、If the tool is slightly faulty or cannot reach the original function after use, do not continue to use it, and check it immediately.
4、Use all kinds of tools, be sure to follow the various safety regulations and instructions for operation.
5、To choose the appropriate tools to work, tools are too large and easy to cause work injury, tools are too small and easy to cause damage to tools.
6、Check and maintain the tools regularly (about once a week), add grease to the bearings and other rotating parts, add oil to the pneumatic motor parts.
Previous page
Next page
Other developments
The advantages of pneumatic components, application scope and maintenance methods are introduced
Although people who are not familiar with pneumatic components are not familiar with this, and they do not know what it is used for when they see it, but it is actually very widely used in life, today the new benefit pneumatic movement will briefly introduce some knowledge about the components for your familiarity.
The current technological development of pneumatic components
As the process of industrial automation continues to accelerate, technologies such as artificial intelligence are beginning to be applied to all aspects of industrial production, and pneumatics has become an important force in this change
The future outlook of the pneumatic components industry
Pneumatic components product range is wide and scattered, the difference between the cost of research and development and the cost of production equipment is quite large, so there are many manufacturers in the industry, but with a well-known brand supplier is quite limited, with brand awareness of the supplier market share is quite large.
Precautions for the use of pneumatic components
Pneumatic components are used in places such as rolling mills and textile assembly lines. Pneumatic components are used in two main areas: maintenance and supporting. Be careful when working on the use of pneumatic components, otherwise it will cause significant losses, the following is a note of caution when using pneumatic components.
What are the pneumatic components and how are they classified?
Industrial pneumatic components may sound complex and difficult to understand. However, once you break down each equipment type, their functions and components are easy to grasp, and many industries gravitate toward pneumatics and integrating them into their machines because it's an easy way to keep maintenance costs low and keep machines running longer.
Application of pneumatic components
The expansion of the application of pneumatic technology is a sign of the development of the pneumatic industry. The application of pneumatic components for two main aspects: maintenance and supporting.
Specialized in pneumatic components, such as pneumatic valves, F.R.L., cylinders and other accessories.
Address: 5# Shunhai Road, Yangting,Weihai,Shandong, China