Double Axis Cylinder
Double Axis Cylinder

Honduras Double Axis Cylinder

According to the operating load, select the suitable cylinder bore size, under the high-temperature environment, the high-temperature type cylinder must be applied.

Category:

HondurasPneumatic Cylinder

86-0631-5768907

Inquire

Product Description

1. Parameter

 

Inner bore 10 16 20 25 32
Outer bore of piston rod 6 8 10 12 16
Action style double action double action double action double action double action
press side pull side press side pull side press side pull side press side pull side press side pull side
Pressured area (cm²) 1.57 1.00 4.02 3.01 6.28 4.71 9.81 7.55 16.07 12.05
Air pressure (MPa) 0.1 - - 4.02 3.01 6.28 4.71 9.81 7.55 16.07 12.05
0.2 3.14 2.00 8.04 6.02 12.56 9.42 19.62 15.10 32.14 24.10
0.3 4.70 3.00 12.06 9.03 18.84 14.13 29.43 22.65 47.21 36.15
0.4 6.28 4.00 16.08 12.04 25.12 18.84 39.24 30.20 64.28 48.20
0.5 7.84 5.00 20.10 15.05 31.40 23.55 49.05 37.75 80.35 60.25
0.6 9.42 6.00 24.12 18.06 37.68 28.26 58.86 45.30 96.42 72.30
0.7 10.98 7.00 28.14 21.07 43.96 32.97 68.87 52.85 112.49 84.35

 

2. Operation

1. According to the operating load, select the suitable cylinder bore size. Under the high-temperature environment, the high-temperature type cylinder must be applied.

2. Before fitting the pipe, all the impurities in the pipe must be cleaned up.

3. The medium used in the cylinder should be filtered through a filter element with a diameter of 40um or above before use.

4. Under the low-temperature environment, must prevent the water freezing in the system.

5. When the cylinder is took away and don't use it for long time, have to take rustproof for the surface and take the covers on the inlet-outlet ports.

 

3. Symbol

 

BS

 

4. Model Indication

 

XQ

previous page:

HondurasDouble Axis Cylinder(TN Series)

HondurasAluminium Mini Cylinder (MALJ Series)

: next page